IPAQ-L(mA) (Discontinued)
Programmable 2-wire Isolation Transmitter for mA Signals
IPAQ-L(mA) is an active isolation transmitter for mA input signals with a 4-20 mA output in a 2-wire connection. It is suitable for direct connection to the input modules of a control system.
Thanks to the programmable input range and the low input impedance, IPAQ-L(mA) meets almost any need for current signal isolation and load amplification.
- Input: mA signal
- Programmable measuring range within -1 to +50 mA
- Output: 4-20 mA in 2-wire connection
- 1500 VAC isolation input/output
- Low input impedance
- Full access to all features while in operation
- Simplified loop check-up with calibration output
- Test output without breaking the loop
- IPRO, easy-to-use Windows configuration software
Technical Specification
| Input mA | -1 to +50 mA |
| Input impedance | 10 Ω |
| Adjustments – Zero | Any value within range limits |
| Adjustments – Minimum spans | 0,4 mA |
| Output | 4-20 / 20-4 mA |
| Operating temperature | -20 to +70 °C / -4 to +158 °F |
| Galvanic isolation | 1500 VAC, 1 min |
| Power supply | 7,5 to 36 VDC |
| Typical accuracy | ±0,1 % of span |
| Mounting | DIN-rail acc. DIN EN50022, 35 mm |