LCD-W110 
Loop Powered LCD Indicator with backlight for field mounting
LCD-W110 is a digital indicator with backlight for installation directly in a
4-20 mA loop without need for external power. The backlight makes it easy to
read and LCD-W110 comes with a high contrast LCD display. The indicator is
designed for field mounting on wall, pipe or DIN rail and have a rugged and
splash proof housing. The scale is easily programmable with push buttons or
via NFC communication using the app INOR Connect. A temperature
transmitter can be integrated for direct sensor input.
- High contrast, 4-digit LCD display with 17.8 mm / 0.7” digits
- Installation directly in a 4-20 mA loop without need for separate power supply
- Loop powered backlight
- Simple scaling with push buttons or NFC communication
- Any range between -1999 to 9999 for 4 to 20 mA input
- Labels for different engineering units are included
- Typical accuracy of 0.05 % allows for high precision read-outs
- HART transparent
- Integrated transmitter as added option
- Field mounting in rugged IP65 / NEMA 4X housing with double cable conduits
- Stores max and min value
Technical Specification
| Type of display | LCD |
| Input current | 4-20 mA |
| Maximum current | 30 mA |
| Minimum current for operation | ~3.5 mA |
| Voltage drop | 4.2 V |
| Indication | |
| Display | 7-segment black LCD with clear background |
| Backlight | White LED powered from the 4-20 mA loop |
| Indication range | 4 digits (-1999 to 9999) |
| Digit height | 17,8 mm / 0.7″ |
| Decimals | Selectable, 0 to 3 |
| Under range / Over range | Flashing symbols Lo (I ≤ 3.6 mA) / HI (I ≥ 21.0 mA) |
| Engineering units | Set of self-adhesive labels included for units: °C, °F, mA, mV, V, bar, mbar, Pa, kPa, MPa, pH, %, s, ms, μs, mm, cm, m |
| Response time | Appr. 1 s Power on delay: 5 s and stable after 1 min |
| Temperature influence | ≤ ±0.01 % FS / °C |
| Configuration method | 3 push buttons or NFC, located on the rear of the display |
| Operation temperature | -20 to +70 °C / -4 to +158 °F |
| Typical accuracy | 0.05 % FS ±1 digit |
| Dimensions | 80 x 110 x 65 mm / 3.15 x 4.33 x 2.56” |
| Protection | IP65 / NEMA 4X |
| Connections | Push-in spring connection, Wire cross section 0.25 mm2-1.5 mm2 AWG 24-16 |
| Cable entries | 2x cable glands M20x1.5 for cable diameter 5-13 mm (0.20-0.51”) (1x blanking plug included) |
| NAMUR NE 43 compliance | Yes |
| HART transparent | Yes |
| Mounting | Wall, 35 mm DIN rail acc. to EN 60715 or 50-65 mm (2-2.55”) pipe with mounting kit |